Engine
Sunday, September 28, 2008
Thursday, September 25, 2008
Best Funny Wedding Readings
First ride with the new engine
We mounted the other night (I, Turi and Gioiabug).
Started at 23.50 ... okay, then home.
yesterday after arranging the problems with the wire around the first gas street. I changed the oil from Mecca after 25 minutes of starting. Now there is the new oil.
New clutch that off pretty "dry dry"!
Progression / resume very fluid and with a nice boost, even if the pulling speed soon! The classic "empty" at the start of 1300 is no more!
Noise low and deep enough if I travel at 70-80 km ... I would still acceptable for my taste.
We mounted the other night (I, Turi and Gioiabug).
Started at 23.50 ... okay, then home.
yesterday after arranging the problems with the wire around the first gas street. I changed the oil from Mecca after 25 minutes of starting. Now there is the new oil.
New clutch that off pretty "dry dry"!
Progression / resume very fluid and with a nice boost, even if the pulling speed soon! The classic "empty" at the start of 1300 is no more!
Noise low and deep enough if I travel at 70-80 km ... I would still acceptable for my taste.
Sunday, September 21, 2008
Altair Blade Blueprint
Motor Works General Meeting
WE This is the third work at home as well as evening work up to 24 more or less ... my Geneva is not that it is very happy, but now are almost at the end!
installation test windows
dismantling the supports of the hood. cleaned with paint remover, sand lightly to make sure that the color of new attacks, with the windows painted (finished with gasket)
arrangement of a lever to control the carburetor (open butterfly)
a lot of jobs power in the engine compartment to accommodate the hornet's nest of wires
mounted electric pump (struggling)
registered valves: 2 were a bit 'nervous, the other slightly abundant
redone the wires on the engine because the old ones were dry, hard and a couple even with the insulation broke! here is the result at the end of the day today, is almost finished, but not the horizontal sheet metal covering the muffler, since Tuesday night we will put it on Crboncino!
this the front
installation test windows
arrangement of a lever to control the carburetor (open butterfly)
a lot of jobs power in the engine compartment to accommodate the hornet's nest of wires
mounted electric pump (struggling)
registered valves: 2 were a bit 'nervous, the other slightly abundant
Friday, September 19, 2008
Bath Mats For Reglazed Tubs
General
First of all let me tell you that last night we (me and Turi) started the engine again ... that satisfaction.
In the meantime I had arranged the engine compartment in its entirety, carefully scraped dirt, and very few places where flowering was a bit 'rusty. The brackets for the hood I have removed and are in the works!
First of all let me tell you that last night we (me and Turi) started the engine again ... that satisfaction. In the meantime I had arranged the engine compartment in its entirety, carefully scraped dirt, and very few places where flowering was a bit 'rusty. The brackets for the hood I have removed and are in the works!
Why Would Heater Trip Circuit
S. Giustina in Colle 2008
A total of 96 teams (including Saturday and Sunday) this year for the event of our club, the Beetle Patavini, which took place on 30/31 August.
a huge success, considering that already on Saturday afternoon, 11 vans and a dozen of type I were present for the arms Evening With more than 40 "guests"!
cakes, cheeses and a good Nebiolo enlivened the evening that has brought us back thirty years in this single photo, with two great coaches!
A total of 96 teams (including Saturday and Sunday) this year for the event of our club, the Beetle Patavini, which took place on 30/31 August.
a huge success, considering that already on Saturday afternoon, 11 vans and a dozen of type I were present for the arms Evening With more than 40 "guests"!
cakes, cheeses and a good Nebiolo enlivened the evening that has brought us back thirty years in this single photo, with two great coaches! Saturday, September 13, 2008
Glengarry Bonnet Tf2 Buy
Subscribe to:
Posts (Atom)